Filter
Top Products
145
Controls in detail
Memory function*
The memory button and stored position
buttons are located on the entry side of
each front seat base.
M Memory button
1, 2, 3 Stored positions
̈ Switch on the ignition (୴ page 38).
or
̈ Open the respective door.
Storing positions into memory
̈ Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position (
୴ page 42).
̈ Press memory button M.
̈ Release memory button M and press
stored position 1, 2 or 3 within
3 seconds.
All settings are stored to the selected
position.
Recalling positions from memory
̈ Press and hold memory position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
!
Do not operate the power seats using
memory button M if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
First move seat backrest to an upright
position.
i
Releasing the memory position button
stops movement to the stored posi-
tions immediately.