Filter
Top Products
172
Controls in detail
Control system
NAV* menu
The
NAV
menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until the message
NAV
appears in the
multifunction display.
The message shown in the multifunction
display depends on the status of the navi-
gation system:
ț With the Modular COMAND System
switched off, the message
NAV OFF
ap-
pears in the multifunction display.
ț With the Modular COMAND System
switched on but route guidance not
activated, the direction of travel and, if
applicable, the name of the street cur-
rently traveled on appear in the multi-
function display.
ț With the Modular COMAND System
switched on and route guidance acti-
vated, the direction of travel and ma-
neuver instructions appear in the
multifunction display.
Please refer to the Modular COMAND
System manual for instructions on how to
activate the route guidance system.
AIRMATIC*/Compass menu
The
AIRMATIC/Compass
menu displays the
Airmatic messages and the direction into
which you are currently driving.
̈ Press button è or ÿ repeatedly
until the
AIRMATIC/Compass
menu
appears in the multifunction display.
For information on AIRMATIC*, see “AIR-
MATIC*” (
୴ page 269).
For information on the compass, see
“Vehicle submenu” (
୴ page 186) and
“Compass” (
୴ page 327).
i
To select a CD from the magazine,
press a number on the Modular
COMAND System key pad located in
the center console.
୴୴