Filter
Top Products
250
Controls in detail
Power windows
Fully opening the door windows
(Express-open)
̈ Press switch 1, 2, 3, or 6
(
୴ page 248) past the resistance point
and release.
The corresponding door window opens
completely.
Fully closing the door windows
(Express-close)
̈ Pull switch 1, 2, 3, or 6
(
୴ page 248) past the resistance point
and release.
The corresponding door window closes
completely.
If the upward movement of a door window
is blocked during the closing procedure,
the door window will stop and open slight-
ly.
̈ Remove the obstruction.
̈ Pull the respective power window
switch past the resistance point again
and release.
Stopping door windows during
Express-operation
̈ Press or pull the respective door win-
dow switch again.
Hinged quarter windows
The switches for opening and closing the
hinged quarter windows are located on the
door control panel of the driver’s door
(
୴ page 34).
1 Hinged quarter windows: opening
2 Hinged quarter windows: closing
Opening
̈ Press and release switch 1.
To stop the hinged quarter window:
̈ Press and release switch 1 once
more.
Warning! G
Driver’s door only:
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not function.
i
If the door window still does not close
when there is no obstruction, pull and
hold the respective power window
switch. The door window will then close
without the obstruction sensor
function.