Filter
Top Products
82
Safety and Security
Occupant safety
More information can be found in the
“Practical hints” section (
୴ page 368).
Installation of infant and child restraint
systems
This vehicle is equipped with tether
anchorages for a top tether strap at each
of the rear seating positions.
1 Anchorage ring
2 Hook
̈ Open the trunk and release the rear
seat backrest (
୴ page 266).
̈ Fold rear seat backrest slightly for-
ward.
̈ Guide top tether strap between head
restraint and top of seat back.
Head restraint must be installed and
positioned such that the top tether
strap can pass freely between the head
restraint and the top of seat back.
Make sure the tether strap is not
twisted.
1 Anchorage ring
2 Hook
̈ Fold up anchorage ring 1.
̈ Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 1.
Warning! G
If the 56 indicator lamp should not
illuminate, the system is not functioning.
You must see an authorized Mercedes-Benz
Center before seating any child on the front
passenger seat.
Warning! G
Never place anything between seat cushion
and child seat (e.g. pillow), since it reduces
the effectiveness of the Occupant Classifi-
cation System. The bottom of the child seat
must make full contact with the passenger
seat cushion. An incorrectly mounted child
seat could cause injuries to the child in case
of an accident, instead of increasing protec-
tion for the child.
Follow the manufacturer’s instructions for
installation of child seats.