Filter
Top Products
411
Practical hints
Replacing SmartKey batteries
SmartKey with KEYLESS-GO*
Replacement batteries: Lithium, type
CR 2025 or equivalent.
̈ Remove the mechanical key
(
୴ page 404).
̈ Insert the mechanical key in side open-
ing and push grey slide (
୴ page 410).
The battery compartment is unlatched.
̈ Pull the battery compartment out of the
housing (
୴ page 410).
1 Battery
2 Tilt battery up
3 Mechanical key
̈ Using mechanical key 3, apply
pressure to position 2.
Battery 1 tilts up slightly.
̈ Pull batteries 1 out in the direction of
arrow.
̈ Using a lint-free cloth, insert new
batteries 1 under the contact spring
with the positive terminal (+) side
facing up.
̈ Return battery compartment into hous-
ing until it locks into place.
̈ Slide mechanical key 3 back into the
SmartKey.
̈ Check the operation of the SmartKey
and the KEYLESS-GO*.