Filter
Top Products
108
Controls in detail
Locking and unlocking
ț The locking knobs in the doors
move down.
ț The anti-theft alarm system is
armed.
Restoring to factory setting
̈ Press and hold buttons Œ and ‹
simultaneously for about 6 seconds un-
til battery check lamp 5 flashes twice.
Checking the batteries
̈ Press button ‹ or Œ.
Battery check lamp 5 comes on
briefly to indicate that the SmartKey
with KEYLESS-GO batteries are in or-
der.
i
You can also lock the vehicle using the
lock button on the trunk lid
(
୴ page 109) or, vehicles with trunk
opening/closing system*,
KEYLESS-GO locking/closing switch
(
୴ page 117).
!
If you can no longer lock or unlock the
vehicle with the SmartKey with
KEYLESS-GO, then the batteries in the
SmartKey with KEYLESS-GO are dis-
charged, the SmartKey with
KEYLESS-GO is malfunctioning or the
vehicle battery is drained.
ț Check the batteries in the
SmartKey with KEYLESS-GO
(
୴ page 108) and replace them if
necessary (
୴ page 409).
ț Use the mechanical key to unlock
the driver’s door (
୴ page 404) and
the trunk (
୴ page 405).
ț Use the mechanical key to lock the
driver’s door (
୴ page 405) and the
trunk (
୴ page 119).
ț Have the vehicle battery and the
battery connections checked
(
୴ page 426).
If the SmartKey with KEYLESS-GO is
malfunctioning, contact an authorized
Mercedes-Benz Center.
!
If battery check lamp 5 does not
come on briefly during check, then the
SmartKey with KEYLESS-GO batteries
are discharged.
Replace the batteries (
୴ page 409).
You can obtain the required batteries
at any authorized Mercedes-Benz
Center.
i
If the batteries are checked within sig-
nal range of the vehicle, pressing
the ‹ or Œ button will lock or
unlock the vehicle accordingly.
୴୴