Filter
Top Products
247
Controls in detail
Power windows
̈ Switch on the ignition (୴ page 36).
Opening the windows
̈ Press switch 1 to 4 to the resistance
point.
The corresponding window will move
downwards until you release the
switch.
Closing the windows
̈ Pull switch 1 to 4 to the resistance
point.
The corresponding window will move
upwards until you release the switch.
Fully opening the door windows
(Express-open)
̈ Press switch 1 or 2 past the
resistance point and release.
The corresponding window opens
completely.
i
You can also open or close the win-
dows using the:
ț SmartKey (summer opening/con-
venience feature) (
୴ page 249)
Depending on current position, the win-
dows may also open or close when:
ț the air recirculation button , in
the control panel of the climate
control (
୴ page 187) or automatic
climate control (
୴ page 197) is
pressed and held
or
ț the charcoal filter button e in
the control panel of the automatic
climate control (
୴ page 197) is
pressed and held.
i
Operating the rear side windows from
the rear is not possible if you activate
the override switch (
୴ page 85).
i
With the SmartKey in starter switch
position 0 or removed from the starter
switch, the power windows can be
operated:
ț until you open the driver’s or pas-
senger’s door.
ț for at least five minutes.
Warning! G
If you pull and hold the switch up when
closing the window, and upward movement
of the window is blocked by some obstruc-
tion including but not limited to arms, hands,
fingers, etc., the automatic reversal will not
operate.