Filter
Top Products
141
Controls in detail
Instrument cluster
Coolant temperature indicator
The coolant temperature indicator is on
the right side in the instrument cluster
(
୴ page 24).
Trip odometer
̈ Make sure you are viewing the stan-
dard display in the multifunction dis-
play (
୴ page 148).
̈ If it is not displayed, press button è
or ÿ on the multifunction steering
wheel repeatedly until the standard dis-
play appears (
୴ page 144).
̈ Press and hold the reset button on the
instrument cluster (
୴ page 140) until
the trip odometer is reset.
Warning! G
ț Driving when your engine is overheated
can cause some fluids which may have
leaked into the engine compartment to
catch fire. You could be seriously
burned.
ț Steam from an overheated engine can
cause serious burns which can occur
just by opening the hood. Stay away
from the engine if you see or hear steam
coming from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out of
the vehicle and do not stand near the vehicle
until the engine has cooled down.
!
Excessive coolant temperature triggers
a warning in the multifunction display
(
୴ page 385) and the red coolant warn-
ing lamp in the instrument cluster
comes on (
୴ page 364).
The engine should not be operated with
the coolant temperature above 248°F
(120°C). Doing so may cause serious
engine damage which is not covered by
the Mercedes-Benz Limited Warranty.
i
During severe operating conditions,
e.g. stop-and-go traffic, the coolant
temperature may rise close to 248°F
(120°C).