Filter
Top Products
242
Controls in detail
Audio system
Redial
If the number you have dialed is busy, you
can again place calls to the last ten tele-
phone numbers dialed using the redial
function.
ț Manual redial
̈ Press s button.
The telephone number last dialed
will appear in the display.
̈ Select desired telephone number
with button ‚ or ƒ.
The letter
L
and the number of the
memory position appears in the
left-hand corner of the display. The
numbers are stored in the order of
the calls made.
̈ When you have selected a number,
press s button.
The call will be made.
Accepting an incoming call
If the telephone is active in the background
(reception symbol is visible in the display),
the audio source is muted when an incom-
ing call is received. A ringing tone can be
heard and the caller’s telephone number,
or the name under which the telephone
number has been saved in the telephone
book, appears in the display. If the caller’s
number is not relayed,
CALL
will appear in
the display.
̈ Press s button.
The call is accepted.
Muting a call
It is possible to mute a call; the caller is
then no longer able to hear you.
ț Mute on
̈ Press
MUT
soft key.
̈
MIC MUTE
will appear in the display.
ț Mute off
̈ Press
MUT
soft key again.
i
If you have activated the automatic re-
dial function on your mobile phone, the
number of the person being called is
automatically redialed after a short
waiting period if there is a busy signal.
Refer to the separate operating instruc-
tions for the mobile phone.