Filter
Top Products
57
Getting started
Parking and locking
̄ Parking and locking
You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.
Parking brake
1 Release handle
2 Parking brake pedal
̈ Step firmly on parking brake pedal 2.
When the engine is running, the
warning lamp ; (USA only)
or 3 (Canada only) in the instru-
ment cluster will be illuminated.
Warning! G
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the
vehicle.
Warning! G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
Warning! G
To reduce the risk of personal injury as a re-
sult of inadvertent vehicle movement, be-
fore turning off the engine and leaving the
vehicle always:
ț Keep right foot on brake pedal.
ț Firmly depress parking brake pedal.
ț Move the gear selector lever to
position P.
ț Slowly release brake pedal.
ț When parked on an incline, turn front
wheel towards the road curb.
ț Turn the SmartKey to starter switch
position 0 and remove, or press
start/stop button (vehicles with
KEYLESS-GO*).
ț Take the SmartKey or the SmartKey with
KEYLESS-GO* and lock vehicle when
leaving.
୴୴