Leica GSI16 GPS Receiver User Manual


 
37
Getting Started with Format Manager-1.1.0en Quick Tour III - Creating a Leica GSI16 Output - Free Codes
It is recommended that you use the Free Coded sample data to test
this format file. Import this sample data into SKI-Pro and then export
the data using this format file.
When you installed SKI-Pro, the Free Coded sample data should
have been installed on your PC in:
\SkiPro\Data\SampleData\Sys500\Free Coded\
When this sample data is exported using this format file, you should
see the following output. If you do not, carefully check the format file
to identify the problem.
If you do not see any code information, it is possible
that you have selected in the export setting options in
SKI-Pro to sort the data by Point Id. Export the data
again, this time sorting by Time.