Filter
Top Products
32
Getting Started with Format Manager-1.1.0en
Quick Tour II - Creating a Leica GSI16 Output - Thematical Codes
Congratulations! You have created a GSI16 format file that can be
used with either SKI-Pro or on board the System 500 sensor.
It is recommended that you use the Thematically Coded sample
data to test this format file. Import this sample data into SKI-Pro and
then export the data using this format file.
When you installed SKI-Pro, the Thematical sample data should
have been installed on your PC in:
\SkiPro\Data\SampleData\Sys500\Thematic Coded\.
When this sample data is exported using this format file, you should
see the following output. If you do not, carefully check the format file
to identify the problem.
The best way to test a format file is to use any sample
data and inspect the output. The format file can then be
edited until you are satisfied with the output.