Filter
Top Products
22
Getting Started with Format Manager-1.1.0en
Quick Tour I - Creating a Report Style Output
Congratulations! You have created a Report Style format file that
can be used with either SKI-Pro or on board the System 500 sensor.
It is recommended that you use the Real Time sample data to test this
format file. Import this sample data into SKI-Pro and then export the
data using this format file.
If you are not sure how to use the format file in SKI-Pro, please refer
to the Quick Tour I in the Getting Started with SKI-Pro user
manual.
When you installed SKI-Pro, the sample data should have been
installed on your PC in the directory:
\SkiPro\Data\SampleData\Sys500\Realtime\.
When you export the sample data using this format file, you should
see the following output. If you do not, check the format file to
identify the problem.
The best way to test a format file is to use any sample
data and inspect the output. The format file can then be
edited until you are satisfied with the output.