Filter
Top Products
24
Getting Started with Format Manager-1.1.0en
Quick Tour II - Creating a Leica GSI16 Output - Thematical Codes
The output shown below is required.
In this format, the Export Formatstrings consist of both text and
export variables. For each point, the code data is output on one line
and then the point ID and coordinate data is output immediately on the
following line.
Note also the following characteristics of this format file:
This format file does not include a Header, Block Titles or a
Footer. It contains only one Export Formatstring.
The Coordinate values are output in mm values and contain no
decimal point.
All variables are right aligned.
The length of the output variables must always be exactly 16. If the
surveyed data contains less than 16 characters for any variable then
the "fill" character must be 0. If the surveyed data that is output using
this format file contains more than 16 characters, then the data must
be truncated.
Attributes 2 and 3 for points p00003 to p00005 were not given a
value when surveyed. In the output above, they are given a "default
value" of 0.
Each line contains an incrementing number - the GSI block
number
Point ID Easting Northing Height
Code ID Attributes 1,2 and 3
Point ID and
coordinates
Code data
Incrementing
block number