KTM 530 EXC-R EU Motorcycle User Manual


 
OPERATING ELEMENTS 18
Display mode SPEED/TR2 (trip master 2)
400324-01
Press the buttonb briefly and repeatedly until TR2 appears at the top right of the
display.
TR2 (trip masterb2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button b"+" and the buttonb"". A very
practical function for rides by the road book.
Info
The TR2 value can also be corrected manually during the journey with the but-
tonb"+" and the buttonb"".
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
Press the buttonb"+". Increases value of TR2.
Press the buttonb"". Reduces value of TR2.
Press the buttonb
for 3 - 5 seconds.
Deletes value of TR2.
Press the buttonb
briefly.
Next display mode
Disply mode SPEED/A1 (average speedb1)
400325-01
Press the buttonb briefly and repeatedly until A1 appears at the top right of the
display.
A1 (average speed 1) shows the average speed calculated using TR1 (trip master 1) and
S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel sensor and
ends 3 seconds after the last impulse.
Press the buttonb"+". No function
Press the buttonb"". No function
Press the buttonb
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Press the buttonb
briefly.
Next display mode
Display mode SPEED/A2 (average speed 2)
400326-01
Press the buttonb briefly and repeatedly until A2 appears at the top right of the
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watchb2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
timed after the ride.
Press the buttonb"+". No function
Press the buttonb"". No function
Press the buttonb
for 3 - 5 seconds.
Press the buttonb
briefly.
Next display mode