KTM 530 EXC-R EU Motorcycle User Manual


 
OPERATING ELEMENTS 17
Display mode SPEEDb/bCLK (time)
400319-01
Press the button b briefly and repeatedly until CLK appears at the bottom right of
the display.
The time is displayed in CLK display mode.
Press the buttonb"+". no function
Press the buttonb"". no function
Press the buttonb
for 3 - 5 seconds.
The display changes to the Setup menu of the clock.
Press the buttonb
briefly.
next display mode
Display mode SPEED/LAP (lap time)
400320-01
Press the buttonb briefly and repeatedly until LAP appears at the bottom right of
the display.
In the LAP display mode, up to 10 lap times can be timed with the stop watch.
Info
If the lap time continues after you press the buttonb"", 9 memory locations are
already occupied.
Lap 10 must be timed with the buttonb"+".
Press the buttonb"+". Starts or stops the clock.
Press the buttonb"". Stops the current lap time and saves it, and the stop watch
starts the next lap.
Press the buttonb
for 3 - 5 seconds.
The stop watch and the lap time are reset.
Press the buttonb
briefly.
Next display mode
Display mode SPEED/ODO (odometer)
400317-01
Press the buttonb briefly and repeatedly until ODO appears at the bottom right of
the display.
In ODO display mode, the total number of kilometers ridden is displayed.
Press the buttonb"+". No function
Press the buttonb"". No function
Press the buttonb
for 3 - 5 seconds.
Press the buttonb
briefly.
Next display mode
Display mode SPEED/TR1 (trip masterb1)
400323-01
Press the buttonb briefly and repeatedly until TR1 appears at the top right of the
display.
TR1 (trip masterb1) runs constantly and counts up to 999.9.
It can be used to measure the distance covered during trips or between two refueling
stops.
TR1 is coupled with A1 (average speed 1) and S1 (stop watch 1).
Info
If 999.9 is exceeded, the values of TR1, A1 and S1 are automaticallt reset to
0.0.
Press the buttonb"+". No function
Press the buttonb"". No function
Press the buttonb
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Press the buttonb
briefly.
Next display mode