KTM 450 SMR Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 56
400243-10
Stand the motorcycle upright on a horizontal surface.
Remove the radiator cap.
Check the coolant level in the radiator.
Coolant level
above radiator fins. 10mm (0.39in)
» If the level of the cooling liquid does not meet specifications:
Correct the coolant level.
Alternative 1
Coolant ( P. 82)
Alternative 2
Coolant (mixed ready to use) ( P. 82)
Refit the radiator cap.
Draining coolantx
Warning
Danger of scaldingThe coolant gets very hot when the motorcycle is driven and is under high pressure.
Do not open the radiator, radiator hoses or other cooling system components when the engine is hot. Allow the engine and
cooling system to cool down. If you scald yourself, hold the affected area under cold water immediately.
Warning
Danger of poisoningCoolants are poisonous and a health hazard.
Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and
contact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor im-
mediately. Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.
400242-11
Stand the vehicle upright.
Place a suitable container under the water pump cover.
Remove screw
. Remove the radiator cap.
Completely drain the coolant.
Fit screw
with a new seal and tighten it.
Specification
Screw, water pump cover M6 10Nm
(7.38lbfft)
Refilling coolantx
Warning
Danger of poisoningCoolants are poisonous and a health hazard.
Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and
contact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor im-
mediately. Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.
400244-10
Make sure that the screw is tightened.
Stand the vehicle upright.
Pour coolant in up to measurement
above the radiator fins.
Specification
10mm (0.39in)
Coolant 1.2l (1.27qt.) Coolant ( P. 82)
Coolant (mixed ready to use)
( P. 82)
Refit the radiator cap.
Make a short test ride.
Check the coolant level. ( P. 55)