KTM 450 SMR Motorcycle User Manual


 
OPERATING ELEMENTS 10
23(5$7,1*(/(0(176

Clutch lever
400195-10
The clutch lever is fitted on the left side of the handlebar.
The clutch is hydraulically operated and self-adjusting.
Hot start lever
400195-12
The hot start lever is fitted on the left side of the handlebar.
If you pull the hot start lever to the handlebar during the start procedure, a bore is
opened in the carburetor through which the engine can draw in extra air. This gives a
leaner fuel-air mixture, which is needed for a hot start.
Possible states
Hot start function activated ಥHot start lever is pulled out to the stop.
Hot start function deactivated ಥHot start lever is pushed back to the stop.
Hand brake lever
500176-10
The hand brake lever is located on the right side of the handlebar and operates the
front wheel brake.
Short circuit button
400197-10
The short circuit button is fitted on the left side of the handlebar.
Possible states
Short circuit button in basic position ಥIn this position, the ignition circuit is
closed, and the engine can be started.
Short circuit button pressed ಥIn this position, the ignition circuit is interrupted,
a running engine stops, and a non-running engine will not start.
Electric starter button
500177-10
The electric starter button is fitted on the right side of the handlebar.
Possible states
Electric starter button in basic position
Electric starter button pressed ಥIn this position, the electric starter is actuated.