Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 77
9.93Installing the air filter x
301262-10
– Mount the clean air filter onto the air filter support.
– Apply grease to the section of the air filter.
Long-life grease ( p. 107)
500107-10
– Put in both parts together, position them and fix them with air filter holder .
Info
If the air filter is not correctly mounted, dust and dirt can penetrate into the
engine and can cause damage.
– Install the air filter box lid. ( p. 76)
9.94Cleaning air filter x
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Do not clean the air filter with fuel or gasoline since these substances attack the foam.
–
Remove the air filter. x ( p. 76)
– Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaner ( p. 107)
Info
Only squeeze the air filter when drying it out, never wring it out.
– Oil the dry air filter with a high/quality filter oil.
Oil for foam air filter ( p. 107)
– Clean the air filter box.
– Check carburetor connection boot for damage and tightness.
–
Install the air filter. x ( p. 77)
9.95Adjusting basic position of clutch lever
500133-11
– Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw .
Info
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!