Filter
Top Products
CONTROLS 21
5.27Display mode SPEED/S1 (stop watch 1)
400327-01
– Press the button briefly and repeatedly until S1 appears at the top right of the
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0.0.
Press the button
briefly.
Next display mode
5.28Display mode SPEED/S2 (stop watch 2)
400328-01
– Press the button briefly and repeatedly until S2 appears at the top right of the
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button . Starts or stops S2.
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of S2 and A2 are reset to 0.0.
Press the button
briefly.
Next display mode
Table of functions
Display Press the button . Press the button . Press the button for 3 -
5 seconds.
Press the button
briefly.
Display mode SPEED/H
(service hours)
No function No function The display changes to
the Setup menu of the
speedometer functions.
Next display mode
Display mode SPEED/CLK
(clock)
No function No function The display changes to
the Setup menu of the
clock.
Next display mode
Display mode SPEED/LAP
(lap time)
Starts or stops the
clock.
Stops the current lap
time and saves it, and
the stop watch starts
the next lap.
The stop watch and the
lap time are reset.
Next display mode
Display mode
SPEED/ODO (odometer)
No function No function – Next display mode
Display mode SPEED/TR1
(trip master 1)
No function No function The TR1, A1 and S1 dis-
plays are reset to 0.0.
Next display mode
Display mode SPEED/TR2
(trip master 2)
Increases value of TR2. Reduces value of TR2. Deletes value of TR2. Next display mode
Display mode SPEED/A1
(average speed 1)
No function No function The TR1, A1 and S1 dis-
plays are reset to 0.0.
Next display mode
Display mode SPEED/A2
(average speed 2)
No function No function – Next display mode
Display mode SPEED/S1
(stop watch 1)
No function No function Displays of TR1, A1 and
S1 are reset to 0.0.
Next display mode
Display mode SPEED/S2
(stop watch 2)
Starts or stops S2. No function Displays of S2 and A2
are reset to 0.0.
Next display mode
Table of conditions and menu activation
Display The motorcycle is
stationary
Menu can be acti-
vated
Display mode SPEED/H (service hours) •