MAINTENANCE WORK ON CHASSIS AND ENGINE 76
9.89Installing the main silencer
800020-11
– Mount the main silencer. Mount and tighten screws .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Reconnect spring .
9.90Removing the air filter box lid
800021-10
– Pull off the air filter box lid in area to the side and remove to the front.
9.91Installing the air filter box lid
800021-11
– Insert the air filter box lid into the rear area and clip it into the front area .
9.92Removing the air filter x
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
– Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Remove the air filter box lid. ( p. 76)
500107-10
– Detach air filter holder at the bottom and swing it to one side. Remove the air
filter with the air filter support.
– Remove the air filter from the air filter support.