Kenwood TH-D72E GPS Receiver User Manual


 
REPEATER – 2
Q Selecting a Tone Frequency
To select the tone frequency required to access your
desired repeater:
1 Turn the Tone function On.
2 Press [F], [TONE].
The current Tone frequency appears on the display
and blinks. The default frequency is 88.5 Hz.
3 Press [ ]/[ ] or rotate the Tuning control to select
your desired frequency.
To exit the tone frequency selection, press [ESC ].
4 Press [ OK] to set the selected frequency.
Note: If you have set up a Memory channel with a tone setting,
simply recall the Memory channel instead of setting up the tone
frequency every time.
No.
Frequency
(Hz)
No.
Frequency
(Hz)
No.
Frequency
(Hz)
01 67.0 16 110.9 31 186.2
02 69.3 17 114.8 32 192.8
03 71.9 18 118.8 33 203.5
04 74.4 19 123.0 34 206.5
05 77.0 20 127.3 35 210.7
06 79.7 21 131.8 36 218.1
07 82.5 22 136.5 37 225.7
08 85.4 23 141.3 38 229.1
09 88.5 24 146.2 39 233.6
10 91.5 25 151.4 40 241.8
11 94.8 26 156.7 41 250.3
12 97.4 27 162.2 42 254.1
13 100.0 28 167.9
14 103.5 29 173.8
15 107.2 30 179.9
Q Automatic Repeater Offset
This function automatically selects an offset direction
and activates the Tone function, according to the
frequency that you have selected. To obtain an up-
to-date band plan for repeater offset direction, contact
your national Amateur Radio association.
1 Enter Menu mode and access Menu 161.
2 Set the ARO to “On”.
3 Press [A/B] to select the A band.
4 Press [VFO] to select VFO mode.
5 Press [ ]/[ ] or rotate the Tuning control to select
your desired frequency.
6 Press [PTT] to start a call.
You will be transmitting on an offset frequency value
determined from your offset setting value and an
offset direction depending on your selected frequency.
Refer to the settings below for offset directions:
TH-D72A:
Under 145.100 MHz: No offset
(Simplex operation)
145.100 ~ 145.499 MHz: – 600 kHz offset
145.500 ~ 145.599 MHz: No offset
(Simplex operation)
146.000 ~ 146.399 MHz: + 600 kHz offset
146.400 ~ 146.599 MHz: No offset
(Simplex operation)
146.600 ~ 146.999 MHz: – 600 kHz offset
147.000 ~ 147.399 MHz: + 600 kHz offset
147.400 ~ 147.599 MHz: No offset
(Simplex operation)
147.600 ~ 147.999 MHz: – 600 kHz offset
148.000 MHz and higher:No offset
(Simplex operation)
Under 442.000 MHz: No offset
(Simplex operation)
442.000 ~ 444.999 MHz: + 5 MHz offset
445.000 ~ 446.999 MHz: No offset
(Simplex operation)
447.000 ~ 449.999 MHz: – 5 MHz offset
450.000 MHz and higher:No offset
(Simplex operation)
TH-D72E:
Under 145.000 MHz: No offset
(Simplex operation)
145.600 ~ 145.799 MHz: – 600 KHz offset
145.800 MHz and higher:No offset
(Simplex operation))