Filter
Top Products
TRANSCEIVER RESET
There are 3 types of transceiver reset available:
VFO Reset
Use to initialize the VFO and accompanying settings.
Partial Reset
Use to initialize all settings other than the Memory channels, the DTMF memory, and the PM channels.
FULL Reset
Use to initialize all transceiver settings that you have customized. (Date and time are not reset.)
There are 2 ways to perform a reset on the transceiver: by key operation and by accessing Menu mode.
KEY OPERATION
1 Turn the transceiver power OFF.
2 Press [F] + Power ON.
3 Press [
]/[ ] orrotate the Tuning control and select
your desired reset type: “VFO Reset”, “Partial Reset”,
or “Full Reset”.
4 Press [ OK] to set the reset type.
•A confirmation message appears on the display.
•Press [ESC ] to cancel the reset.
5 Press [ OK] again to perform the reset.
MENU MODE
1 Enter Menu mode and access Menu 199.
2 Press [ ]/[ ] orrotate the Tuning control and select
your desired reset type: “VFO Reset”, “Partial Reset”,
or “Full Reset”.
3 Press [ OK] to set the reset type.
•A confirmation message appears on the display.
•Press [ESC ] to cancel the reset.
4 Press [ OK] again to perform the reset.
RESET – 1