Filter
Top Products
APRS – 6
FILTER FUNCTION
This function allows you to select only the specified types
of data from the station list.
1 Press [LIST] and display the list of stations.
2 Press [MENU] and display the station list menu.
3 Press [ ] or rotate the Tuning control to select
[Filter], then press [ OK].
• The filter type list appears on the display.
4 Press [ ]/[ ] or rotate the Tuning control to select a
filter type, then press [ OK].
• “Filtering” appears on the display and filtering begins.
All(Off)
The filtering function is cancelled,
displaying all stations.
Digipeater
Only Digipeater Stations are
displayed.
Weather Only Weather Stations are displayed.
Mobile Only Mobile Stations are displayed.
Object Only Object Stations are displayed.
KENWOOD
Only Kenwood TH-D72, TH-D7,
TM-D700, TM-D710, and RC-D710
Stations are displayed.
NAVITRA
Only Navitra Stations starting from
$PNTS are displayed.
QSY (Freq)
Only stations containing frequency
(QSY) data are displayed.
1-Way
Only the microphone encoder station
(tracker) and the GPS tracker are
displayed.
Others
Stations other than those listed
above are displayed.
5 The newly filtered station list appears on the display.
• After the filter function is turned ON, received data is added
to the list but will on be displayed if it matches the filter type
selected.
• For example, with the station list displayed and the filter
selection set to “Weather”, all stations not relating to weather
are no longer displayed. If mobile station data is received at
this time, the new data will also not be displayed as long as
the weather filter is active.
RECEIVING A MESSAGE
Each time a proper message is received, the frequency
display is interrupted to show information as below:
First page:
Last page:
Status Indicator Meaning Indicator
RX or TX Indicator Call sign (TX)
Message TX/RX date
Receive time Line number
• The display shows up to 67 characters (24 characters by one
page) of the message.
• The following indicators appear depending on the types of
received messages:
Status
n
1
“n” indicates the remaining number of times
for transmitting the message (or bulletin).
1
A message for which a reception
acknowledgment was returned
1
A message (or bulletin) transmitted
5 times (For a message, a reception
acknowledgment was not returned.)
Meaning
Message addressed to you
Bulletin message
Report by the National Weather Service
RX or TX
Received message (or bulletin)
A message (or bulletin) for transmitting
1
These indicators appear for outgoing messages (or bulletins).