Filter
Top Products
69
English
5
Press SET.
• If the loaded MD has no groups, you cannot go on to
the following steps.
• When the selected track belongs to a group, its group
number appears in the main display.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
6
Press GROUP SKIP ¢ or GROUP SKIP 4
while holding down SHIFT to select the group.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
8
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flashes
while the changes you have made are recorded on the
MD.
When “CANNOT ENTRY!” appears in step
7
You are trying to enter the selected track into the same group
again. Repeat procedure from step
6
.
Adding a Track to a Group—ENTRY GR
This function allows you to enter a track into a group. The
track will be added as the last track in the selected group.
The track numbers will be renumbered.
• To stop any time during the editing process before step
8
,
press MD GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very beginning—that is, inserting a disc. You can also edit
an MD during playback (in normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press MD GROUP TITLE/EDIT repeatedly until
“ENTRY GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• During playback:
The currently playing track number starts flashing.
4
Press ¢ or 4 to select the track.
• You can select the track using the number buttons. In
this case, the selected track starts playback
repeatedly.
Ex.: When track 13 is selected.
Ex.: When group 18 is selected.
Track No.
EN65_74UX-A10DVD[UB].pm6 02.10.7, 8:11 AM69