JVC UX-A10DVD Automobile Alarm User Manual


 
60
English
To record a single track during play or pause
Available for:
SVCD
SVCD
VCD
VCD
Anduio CD
Audio CD
You can do this operation for SVCD or VCD only
without the PBC function.
On the main unit ONLY:
While playing back or pausing a track you want to
record, press ONE TOUCH MD REC.
The playback of the track is stopped, and the same track
starts playing from the beginning again. This time, the MD
recorder starts recording the track.
After the track is recorded, both the DVD player and the
MD recorder stop automatically.
If you do the above operation for a DVD or an MP3
disc
Recording starts from the point where you press the button and
does not stop after the current chapter or track is recorded.
(Playback also continues.)
To change the information shown in the main display
On the remote control ONLY:
Press DISP/CHARA.
Each time you press the button, the information in the
main display changes as follows:
For SVCD, VCD, or Audio CD:
Ex.: When recording an Audio CD.
For MP3 disc:
For DVD:
7 From a DVD
Available for:
DVD
DVD
Analog recording method is used for DVD-to-MD
recording.
1
Prepare a disc.
After placing a disc, press DVD #/8 (or DVD
SELECT 3 on the remote control), then 7 before
going to the next step.
You can create a program (see page 37) or select the
random play mode (see page 39) as you wish.
2
Insert a recordable MD into the MD loading slot.
3
Set the MD recording length mode, “LP:”-prefix
addition mode, and the group recording mode.
See “Setting MD Recording Modes” on page 59.
4
Press ONE TOUCH MD REC on the main unit.
Recording starts and the MD REC indicator starts
flashing on the display.
After recording, both the DVD player and the MD
recorder stop automatically.
To stop recording, press 7.
“WRITING” flashes in the main display for a while.
When recording from some DVDs which have its
menu
Playback may not go further from the point where the menu is
shown. (You cannot select any item on the menu during recording.)
In such a case, stop the recording and select the point where you
want to start recording as follows:
1
Start disc playback.
2
Select the item on the disc menu which you want to record.
The selected item starts playback.
3
Press 8 where you want to start recording.
4
Press ONE TOUCH MD REC to start recording.
Ex.: A DVD is now recorded on an MD using LP2 and
the group recording.
Remaining recording time
MD recording indicators
Elapsed playing time of
the current title
3
1
2
Clock time
3
4
2
1
Clock time
3
5
2
Clock time
6
1 Current track No.
2 MD track No.
3 MD group No.*
4 Current group No.
5 Current title No.
6 Current chapter No.
*When recording on the MD which has no group and when
the group recording is not activated, “– –” will appear.
EN56_64UX-A10DVD[UB].pm6 02.10.7, 8:11 AM60