JVC UX-A10DVD Automobile Alarm User Manual


 
21
English
Selecting the Sound Modes
You can select one of four preset sound modes.
This function also affects the sound from headphones.
This function affect neither recording nor the signals
output through the DVD OPTICAL DIGITAL OUT
termminal.
On the remote control ONLY:
To select the sound modes, press SOUND repeatedly until
the sound mode you want appears in the main display.
The SOUND indicator also lights up on the display.
Each time you press the button, the sound mode changes
as follows:
ROCK: Boosts low and high frequency.
Good for acoustic music.
POP: Good for vocal music or voice.
CLASSIC: Good for classical music.
JAZZ: Good for jazz music.
FLAT: Cancels the sound mode.
To check the sound mode currently selected, press
SOUND.
The currently selected sound mode will appear in the main
display.
To cancel the sound modes, press SOUND repeatedly
until FLAT appears in the main display.
The SOUND indicator goes off.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is clearly
maintained regardless of how low you set the volume
Active Hyper Bass Pro.
This function also affects the sound from headphones.
This function affect neither recording nor the signals
output through the DVD OPTICAL DIGITAL OUT
termminal.
To get the effect, press AHB PRO repeatedly so that AHB
PRO 1 or AHB PRO 2 appears in the main display.
The AHBPRO indicator also lights up on the display.
Each time you press the button, the Active Hyper Bass
Pro mode changes as follows:
•“AHB PRO 2 is more effective than AHB PRO 1.
To cancel the effect, press AHB PRO repeatedly until
AHB PRO OFF appears in the main display.
The AHBPRO indicator goes off.
AHB PRO 1 AHB PRO 2
AHB PRO OFF
(
canceled
)
POP
JAZZ
ROCK
CLASSIC
FLAT
(canceled)
Ex.: When you select “ROCK.”
SOUND indicator
AHBPRO indicator
Ex.: When you select “AHB PRO 1.”
EN18_23UX-A10DVD[UB].pm6 02.10.7, 8:09 AM21