Filter
Top Products
43
English
• When the program play is activated, the program
entry display appears in the main display after a few
seconds. (See step
5
.)
• Each time you press the button, play mode changes
as follows:
5
Press ENTER to enter the program play.
The program entry display appears in the main display.
• Each time you press the button, the program play
turns on and off.
6
Press the number buttons to select the tracks you
want to program.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
7
Press MD 3/8.
The tracks are played in the order you have programed.
The program play ends when all the programed tracks
are played back.
To stop playing, press 7.
Playback stops, but the program play is still activated.
• To exit from the program play, see “To exit from the
program play” on the next page.
• ALL:
–For normal play or the random play:
Repeats all the tracks on the MD.
–For the program play mode:
Repeats the program.
–For the group play mode:
Repeats all the tracks in a group.
The
indicator lights up on the display.
•1:
Repeats one track.
The indicator lights up on the display.
To return to the normal display, press PLAY MODE.
To stop playing, press 7.
To cancel the repeat play, perform steps
1
and
2
on page
42, so that “REPEAT OFF” appears in the main display and
the repeat mode indicator goes off.
To return to the normal display, press PLAY MODE.
• Ejecting the MD or turning off the unit will also cancel
the repeat play.
Programing the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
• You cannot perform the program play while the random
play (see page 44) or the group play (see page 45) is
activated.
On the remote control ONLY:
1
Load an MD.
2
Press MD 3/8, then 7.
The source is changed to “MD” and playback is
stopped.
3
Press PLAY MODE.
“REPEAT” (with its current setting) appears in the
main display.
4
Press Cursor 3/2 so that “PROGRAM” appears in
the main display.
Appears only when the program play is deactivated.
PROGRAM
RANDOM
GROUP
Normal play
REPEAT
Step No.
Total playing time
The last programed track No.
Ex.: Seven tracks have been programed.
PRGM (program) indicator lights up.
EN40_46UX-A10DVD[UB].pm6 02.10.7, 8:10 AM43