Filter
Top Products
2 Quest
®
2 Owner’s Manual
GettInG started > tutorIal
Tutorial
This tutorial guides you through the steps for nding a restaurant in
your area and then creating a route to it. If you have never used a
GPS unit, try this simple task. You will see that using your Quest 2
is fast and easy.
Be sure the antenna is unobstructed as it looks for satellites. For
example, it cannot establish a satellite x if your vehicle is parked
in a garage. Position the antenna so that it is parallel to the
surface of the road so that it can have the best view of the sky.
Step 1: If you have not already done so, flip up the antenna and
snap the Quest 2 into the vehicle mount. See page 4 for additional
instructions. Turn on the Quest 2, if necessary, and acknowlege the
warning message. When the unit has established a satellite x, it
shows a “Ready to Navigate” message.
Map page
Step 2: Press the FIND key. The Find Menu appears. Highlight the
Food & Drink icon located in the Find Menu and press the
OK key.
FIND key
Rocker
OK key
Step 3: A list of restaurants in your area appears on a page similar
to the one shown below. Use the Rocker to highlight a restaurant
in the list. Then press the OK key.
Use the Rocker to
highlight a restaurant.