Filter
Top Products
Cancelling a GOTO
If you decide to stop navigating to the active way-
point, all you have to do is cancel the GOTO.
To cancel an active GOTO:
1. Press the
G
key.
2. Use the arrow keypad to move the field highlight to
the ‘CANCEL GOTO?’ prompt at the bottom of the page
and press
F
.
Clearing a Cluttered Map Display
After you’ve used the GPS 120XL for a few trips,
you may find that your map display has become a bit
messy from keeping track of your every move. For
practice, let’s clean up the screen by clearing the track
log (the plot points left on the Map Page) we’ve just
created during the Getting Started Tour.
1. Press
J
or
Q
until the Menu Page appears.
2. Use the
D
key to move the field highlight to the
‘TRACK LOG’ option.
3. Press
F
to access the track log page.
4. Press the
U
key twice to highlight the ‘CLEAR LOG?’
option. The clear log confirmation page will appear.
5. Use the
L
key to highlight the ‘Yes’ prompt.
6. Press
F
to finish.
Turning the Receiver Off
You’ve now gone through the basic operation of
your new GPS receiver and probably know a little more
than you think about how it works. We encourage you
to experiment with the GPS 120XL until it becomes an
extension of your own navigation skills. If you
encounter any problems using the unit or want to take
advantage of the GPS 120XL’s more advanced features,
refer to the reference section.
To turn the GPS 120XL off:
1. Press and hold the
P
key for 3 seconds.
15
Highlight the ‘CLEAR
LOG?’ prompt and press
ENTER to clear the track
log. Once all 1024 points
are used, the oldest point
will be continuously deleted
to make room for the latest
track log point.
GETTING
STARTED
Cancelling A
GOTO &
Clearing Maps
Holding the POWER key
for three seconds ensures
against accidental shut-off
by accidentally pressing the
button.
120XL Man RevB 7/10/98 10:54 AM Page 15