Filter
Top Products
45
Setup Options
Main Menu
System Page
The System Setup Page allows you to change:
GPS - Choose one of the four GPS options other than
‘Normal’ to signifi cantly save battery power. The ‘Battery
Saver’ mode reduces the rate of satellite signal position
updating and the ‘Use With GPS Off’ option stops satellite
signal reception altogether. The ‘ Demo Mode’ simulates
navigation.
WAAS - Switch between ‘ Enabled’ and ‘Disabled’. See
page 5 for an explanation of WAAS capabilities.
Language - Change the display to any of 6 choices.
Also shown on this page is the Amount of Memory
Used, Power Status, Time, Date, and Backlighting Status.
The ‘ Memory Used’ fi gure refers to the non-volatile
memory within your unit and cannot be adjusted directly.
Saving a number of track logs and waypoints may affect
the percentage but normally will not cause any problems.
The ‘Memory Used’ does not refl ect the 1 MB of memory
storage reserverd for MapSource Points of Interest
CD-ROM.
The ‘Power Status’ icon changes from a “ battery” to
an “electric plug” when external power is connected. The
‘Backlight’ icon changes from a dark outline to a “bright”
outline when you press and release the POWER button.
The Option Menu allows you restore defaults or
display the current version of unit operating software and
the Unit I.D. Number.
To adjust System Page options:
1. Use the THUMB STICK to highlight the fi eld
and then press in to display options. Then use the
THUMB STICK to select.
System Setup Page in Normal
Mode, WAAS Disabled, and
Language set to English.
System Page Options Menu
190-00203-00_0D.indd 45 12/12/2002, 2:58:36 PM