Garmin Venture GPS Receiver User Manual


 
6
Satellite
The Satellite Page options include:
Use With GPS Off - Use this option when you are
indoors, a clear view of the sky is obstructed, or you
want to save battery power. You can enter data, create
routes, etc., but cannot navigate in this mode.
Track Up/ North Up - You can orient the satellite
skyview by selecting ‘Track Up’ (your direction of
travel) or ‘North Up’ (the satellite skyview oriented to
the north).
New Elevation - You can manually enter a new,
more accurate elevation, if known, to increase posi-
tion accuracy.
New Location - If you are more than 600 miles from
where you last used the unit, select the ‘New Loca-
tion’ and then the ‘Use Map’ options to approximate
your location. This gives the unit reference informa-
tion and speeds satellite acquisition.
To select the ‘ Use With GPS Off’ option:
1. Use the THUMB STICK to highlight the Option
Menu button at the top of the page and then press
it in to display the Options Menu.
2. Use the THUMB STICK to highlight the ‘Use With
GPS Off’ option and then press it in to activate.
The eTrex Venture stops tracking satellites and
should not be used for navigation. However, the
next time you turn the unit on, it returns to Normal
GPS operation.
To select ‘ Track Up’ or ‘ North Up’:
1. Use the THUMB STICK to highlight the Option
Menu button at the top of the page and then press
it in to display the Options Menu.
2. Highlight either the ‘Track Up’ or ‘North Up’ option
(depending on which is currently in use), and press
in on the THUMB STICK to activate.
To enter a new elevation:
1. Use the THUMB STICK to display the Options
Menu.
Options
‘North Up’ Skyview Orientation
The Satellite Page
Options Menu
“GPS Off”
Message
Satellite Page Options Menu
Highlight the on-screen button
at the top of the page & press
in on the THUMB STICK.
190-00203-00_0D.indd 6 12/12/2002, 2:58:13 PM