Filter
Top Products
37
Navigating a Route on the
Map Page
Navigation Page with
Bearing Pointer
Main Menu
Routes Options
3. Drag the line to a map item or other location where
you want to establish a new waypoint and then
press in on the THUMB STICK to place the new
waypoint. A waypoint information page displays.
Press the on-screen ‘OK’ button to save the new
waypoint, then press it again after returning to the
Route Map.
To review or remove a route waypoint:
1. Select the Route from the Routes List and press the
THUMB STICK in to display the Route Page.
2. Use the THUMB STICK to highlight the desired
route and press in to display the Route Page for that
route.
3. Use the THUMB STICK to move the map panning
arrow to the waypoint you want to review and press
in to pop-up the Options Menu. Select ‘Review’ or
‘Remove’ and press in again to either display the
Information Page or remove it from the route.
To view the next waypoint in the route:
1. Follow Steps 1 and 2 above.
2. Place the map panning arrow on the waypoint you
are currently viewing and press in to display the
Options Menu. Select ‘Next’ and press in again to
view the next waypoint.
Adding a new waypoint within
a Route
Navigating a Route
A Route can be navigated using the Map Page or the
Navigation Page. The Map Page displays your movement,
the route line, and waypoints on the route. The Naviga-
tion Page shows compass direction and a bearing pointer.
To navigate a route:
1. Select a route from the Routes List and then press in
on the THUMB STICK to display the Route Page.
2. Highlight the on-screen ‘Navigate’ button at the
bottom of the page and then press in on the
THUMB STICK to begin navigating the route.
The screen changes to the Navigation Page.
(Continued)
190-00203-00_0D.indd 37 12/12/2002, 2:58:31 PM