Filter
Top Products
x
SYSTEM CONFIGURATIONS
All NavNet products incorporate a “network circuit board” to integrate each NavNet product
on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is
assigned an IP address to enable transfer of images between other NavNet products. For
example, video plotter pictures can be transferred to a radar and vice versa. Pictures
received via the NavNet may be adjusted at the receiving end.
A NavNet system may consist of up to four NavNet display units and one network sounder.
For a system incorporating three or more products, a “hub” is required to process data.
Single-unit NavNet system
Antenna Unit
(ex. MODEL 1833)
Network
Sounder
ETR-6/10N
(option)
GPS
Navigator
Heading
Sensor
PC, Navigator
External Buzzer
GPS Receiver
GP-310B
Other NavNet Unit
(GD-1900C, etc.)
Remote
Controller
RMC-100
: Option
: Supplied
Rectifier
PR-62
RU-3423*
Ship’s Mains
100/110/220/230 VAC,
1
, 50/60 Hz
12-24 VDC
Display Unit
RDP-127
* = PR-62 for Model 1833,
RU-3423 for Model
1933/1943.
Single-unit NavNet system