Filter
Top Products
3. PLOTTER OPERATION
3-48
3.10.4 Following a route
Selecting the route to follow
1. Press the [MENU] key to open the menu.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key to open the route list.
4. Select a route.
5. Press the GOTO soft key to show the plotter display. The cursor is on the
waypoint nearest own ship.
WP-002
WP-001
FISH
CRAB
GOTO
ROUTE
RETURN
RVRSE
ROUTE
GOTO
WPT
16.0 nm
359.2°M 104.5°M
83.2nm 10.0 kt
FISH
Plotter display, route selected as destination
6. Operate the trackball to place the cursor on the waypoint or leg in the route
from where to start navigating the route.
7. Press the GOTO WPT or FOLLOW LEG soft key, depending on the action
taken at step 6.
A line connects between own ship and all waypoints. The arrows on the lines
show the direction to traverse the route.
Navigating waypoints in reverse order
Press the RVRSE ROUTE soft key followed by the [ENTER] knob to navigate
waypoints in reverse order. The arrows on the route line point in the direction
selected.