Filter
Top Products
2. RADAR OPERATION
2-21
2.16.2 Automatic shift
The amount of automatic shift is calculated with speed, and the amount is limited
to 60% of the range in use. For example, if you set the shift speed setting for 15
knots and the ship is running at 10 knots, the amount of shift will be about 40%.
The formula for determining shift amount is as shown below.
Ship's speed
Shift speed setting
X 0.6 = Amount of shift(%)
Automatic shift mode is only available in the head-up mode.
Setting automatic shift maximum speed
1. If not displayed, press the [HIDE/SHOW] key to show the radar soft keys.
2. Press the RADAR DISPLY soft key.
3. Press the SHIFT soft key to show the shift soft keys.
4. Press the AUTO S.SPD soft key to display the auto ship speed setting
window.
AUTO SHIP SPEED
15
Auto ship speed setting window
5. Adjust the trackball or [ENTER] knob to set the maximum speed of your
vessel, and then push the [ENTER] knob or the ENTER soft key to set. The
setting range is 1-999 kt and the default setting is 15 kt.
6. Press the RETURN soft key to finish.
Automatic shift
Press the AUTO key to automatically shift the sweep origin. To cancel shift,
press the RADAR DISPLY, SHIFT and OFF soft keys in that order.