Filter
Top Products
4. VIDEO SOUNDER OPERATION
4-18
4.10.2 Bottom alarm
The bottom alarm sounds when the bottom echo is within the alarm range set.
To activate the bottom alarm, the depth must be displayed. Note that the bottom
alarm is turned on or off reciprocally with the bottom alarm on the plotter alarm
menu.
1. Press the [ALARM] key to show the ALARM menu.
2. Use the trackball
to select BOTTOM ALARM.
3. Press the EDIT soft key to show the bottom alarm window.
BOTTOM ALARM
▲
ON
0000.0-0000.0 ft
OFF
▼
Bottom alarm window
4. Use the trackball to select ON or OFF as appropriate. For ON, enter alarm
range with the trackball and [ENTER] knob: Rotate the trackball horizontally
to select digit; rotate the [ENTER] knob to set value.
5. Press the ENTER soft key or push the [ENTER] knob to register setting.
6. Press the [ALARM] key to close the menu.
4.10.3 Fish alarm
The fish alarm sounds when a fish echo is within the preset alarm range. Note
that the sensitivity of the fish alarm can be set on the SOUNDER SYSTEM
SETUP menu.
1. Press the [ALARM] key to show the ALARM menu.
2. Use the trackball
to select FISH ALARM.
3. Press the EDIT soft key to show the fish alarm window.
FISH ALARM
▲
ON
0000.0-0000.0 ft
OFF
▼
Fish alarm window
4. Use the trackball to select ON or OFF as appropriate. For ON, use the
trackball and [ENTER] knob to enter alarm range: Use rotate the trackball
horizontally to select digit; rotate the [ENTER] knob to set value.
5. Press the ENTER soft key or push the [ENTER] knob to register setting.
6. Press the [ALARM] key to close the menu.