Filter
Top Products
7. CUSTOMIZING YOUR UNIT
7-21
7.5 Data Boxes Setup
You may select the data to show in the data boxes for the plotter, radar and sounder
displays. Six boxes may be displayed in case of small size data box and two for large size
data box.
1. Display the radar, plotter or sounder display, whichever you want to set.
2. Press the MENU key to open the main menu.
3. Press one of the following sets of soft keys depending on the display selected at step 1.
Plotter mode: B: PLOTTER SETUP, B: D. BOX
Radar mode: A: RADAR DISPLAY SETUP, B: D. BOX
Sounder mode: A: SOUNDER MENU, B: D. BOX
DATA
BOX
EDIT
RETURN
X
DATA BOX SIZE SMALL
POSITION ON
WAYPOINT OFF
COG ON
SOG ON
STW OFF
BEARING OFF
RANGE OFF
TIME TO GO OFF
ETA OFF
TEMPERATURE OFF
DEPTH OFF
TRIP LOG ON
DATE OFF
TIME OFF
WIND OFF
HEADING OFF
Data box menu
4. Use the Trackball to select an item, then press the A: EDIT soft key.
5. Select ON or OFF as desired.
6. Press the C: ENTER soft key or the ENTER knob to register your selection. Six items
may be set to ON for small data boxes; two for large data boxes.
7. Repeat steps 4-6 to turn other items on or off.
8. Press the MENU key to close the menu.