Filter
Top Products
7. CUSTOMIZING YOUR UNIT
7-2
Contents of general setup menu
Item Description Settings
Key Beep Turns key beep on/off. On, Off
Language Chooses menu language. English, French, German, Italian, Portuguese,
Spanish, Danish, Swedish, Norwegian
Range Unit Chooses unit of range and speed
measurement.
nm, kt; km, km/h; sm, mph; nm & yd, kt; nm &
m, kt; km & m, km/h; sm & yd, mph
Temperature
Unit
Chooses unit of water temperature
measurement.
°C,°F
Depth Unit Chooses unit of depth measurement. m, ft, fa, P/B (Passi/Braza)
Wind Unit Chooses unit of wind measurement. Kt, km/h, MPH, m/s
Wind Data Chooses how to display wind data. Apparent: The wind felt aboard a moving
vessel. It is the combination of the true wind
and the boat wind. True: The true speed and
direction of the wind, not modified by the
effects of the boat's movement.
Speed
Averaging
Calculation of ETA is based on average
ship’s speed over a given period. If the
period is too long or too short,
calculation error will result. Change this
setting if calculation error occurs. The
default setting is suitable for most
conditions.
0-9999 seconds
Local Time
Offset
Enter time difference between local
time and UTC time to use local time.
-13:30 to +13:30. For multiple display unit
configuration
, all units should have the same
time offset.
Reset Trip Log
Resets trip log. Yes, No
Timeout
Display
Setting
Sets number of seconds to show a
window (for example, BRILL, GAIN)
before it is erased from the screen.
15 s, 30 s, 60 s, Continue (no timeout)
Save MOB
Key Function
Defines the function of the SAVE/MOB
key.
Save Ship Position & MOB: Short press to
save ship position, long press to save MOB.
MOB Without Confirmation: Position saved
as MOB position without confirmation. This
setting is only effective with automatic range
selection and with waypoint marker displayed
on radar display.
Quick Point Function: Position saved as
quick point.
Wallpaper Chooses what to display in menu
background.
Requirements for user wallpaper
Size: 252 KB or less, 640(H)x480(V)
Name: wallpaperh.png
No. of Colors: 256
Compression Level: None
Interlace: None
Permeation Color: None
Default: Default wallpaper
User: User wallpaper. To use your own
wallpaper, save Microsoft Photo Editor or
Adobe Photoshop created png image (see
conditions at left) to SD card, load file to
equipment (see Chapter 6) and then choose
this User option.
Lat/Lon
Display
Chooses how many digits (or seconds)
to display after decimal point in latitude
and longitude position.
DD°MM.MM’, DD°MM.MMM’,
DD°MM.MMMM’, DD°MM’SS.S”
(Con’t on next page)