Filter
Top Products
SPECIAL FUNCTIONS
CLEARING/PROGRAMMING PATS 1 & 2 SYSTEM (PETROL)
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
> CLEAR PATS 1 SYSTEM
KEYS PROGRAMMED
DIAGNOSTIC MENU
PRESS ENTER KEY
CLEAR PATS 1 SYSTEM
SWITCH IGNITION ON
IGNITION STATUS OFF
CLEAR PATS 1 KEY
TIME ELAPSED 0:50
TIME REQUIRED 8:00
WAITING TO CLEAR
BACK TO ABORT
Using the UP and DOWN keys select
the
SPECIAL FUNCTIONS.
Using the UP and DOWN keys select
the CLEAR PATS SYSTEM.
Follow the screen instructions to clear
the PATS system.
The TESTER will now start to clear the
PATS system key codes from memory.
NOTE : If WAITING TO CLEAR is not
displayed this indicates the incorrect
system has been selected.
If successful the TESTER will display
all keys cleared and how many keys are
programmed.
CLEAR PATS 2 SYSTEM
ALL KEYS CLEARED
KEYS PROGRAMMED : 1
PRESS ENTER KEY
9