Filter
Top Products
SPECIAL FUNCTIONS
CLEARING PATS SYSTEM (FALCON)
FALCON P.C.M. PATS
PRESS ENTER KEY
Wait for door locks to cycle and then
press ENTER key.
Disconnect TESTER from vehicle.
Wait 30 seconds after disconnecting
TESTER
Insert one of the keys into the ignition
and turn IGNITION ON.
Wait a further 30 seconds and the con-
nect TESTER to vehicle again.
Continue to the same screen as previ-
ously but select P.C.M. And press
ENTER.
Screen will display PCM PATS system.
Select SPECIAL FUNCTIONS and Press
ENTER key. Select PARAMETER RESET
and press ENTER key.
Follow on screen instructions, as the sys-
tem will take the required Ford Timed
access security wait time.
At the end of the time, the doors will cy-
cle from LOCKED to UNLOCKED.
Disconnect TESTER.
Switch Ignition to the OFF position, and
then switch IGNITION to the ON position
with the same key.
The door locks will again cycle from
LOCKED to UNLOCKED.
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
CLEAR PATS 3 SYSTEM
>PARAMETER RESET
DIAGNOSTIC MENU
PRESS ENTER KEY
9