Filter
Top Products
SPECIAL FUNCTIONS
ADD KEY FUNCTION
CLEAR PATS 1 SYSTEM
KEYS PROGRAMMED
> ADD KEY
DIAGNOSTIC MENU
PRESS ENTER KEY
CLEAR PATS 3 KEY
GAINING ACCESS
TIME ELAPSED 0:50
TIME REQUIRED 10:00
ACCESS STATUS
IN PROGRESS
BACK TO ABORT
NOTE : On some vehicles a function is
available to add a key without deleting
the old keys. This takes the normal 10
minutes security access time.
Using the UP and DOWN keys select the
ADD KEY FUNCTION.
After 10 minutes, security access is
gained and the key in the ignition will
be added.
NOTE : Do not start the car after proce-
dure.
Remove key, disconnect TESTER from
vehicle and wait 2 minutes.
Insert key to ignition ON and the re-
move key from ignition.
Test key for starting.
If this procedure is not followed then a
further security access time of 10 min-
utes will be required.
NOTE : Some vehicles, especially fleets
and hire companies have this feature
disabled, and the normal clear down
procedure will be required.
9