Filter
Top Products
FORD CODED ACCESS
9
19. AFTER 5 MINUTES THE FOLLOWING SCREEN WILL BE DISPLAYED ...
20. INSERT THE CODE FROM OPTION 1 INTO THE TESTER.
21. THE TESTER SHOULD EITHER ACCEPT THE CODE AND SAY ‘ACCESS GRANTED’ OR
‘INCORRECT INVALID’
22. IF THE CODE FAIL’S, DISCONNECT THE TESTER.
23. CYCLE THE IGNITION ON AND OFF FOR 6 TIMES, TO RESET THE SYSTEM.
24. CONNECT TESTER AND REPEAT THE PROCEDURE AGAIN.
NOTE : THE INCODES ABOVE CANNOT BE USED AGAIN, YOU MUST START FROM THE
BEGINNING IF THESE DO NOT WORK.
25. WHEN THE NEXT BATCH OF OPTIONS ARE DISPLAYED, THIS TIME USE OPTION 2.
26. IF OPTION 2 FAILS, THEN REPEAT THE WHOLE PROCEDURE AGAIN, BUT USE OPTION
3.
27. IF OPTION 3 FAILS, THEN REPEAT THE WHOLE PROCEDURE AGIN, BUT USE OPTION 1.
28. IF THIS FAILS, THEN REPORT THE CODE USING THE ‘SEND THIS CODE AS A WRONG
ANSWER’ BUTTON.