Filter
Top Products
SPECIAL FUNCTIONS
CLEARING PATS SYSTEM (FALCON)
NOTE : Minimum 2 keys required.
NOTE : Ensure all vehicle doors remain
closed at all times.
Connect TESTER to vehicle diagnostic
connector, select Ford Falcon.
Select BEM first and press ENTER.
DO NOT TURN IGNITION ON when
screen requests to.
Press ENTER and continue.
Select SPECIAL FUNCTIONS and press
ENTER.
Select CLEAR PATS 3 SYSTEM and
press ENTER key.
NOTE : Doors locks will automatically
lock.
Within 5 seconds insert the first key to
be programmed and turn the IGNITION
ON.
The door locks will UNLOCK and LOCK.
Remove the first key from the ignition.
Within 5 seconds insert the second key
to be programmed and turn the
IGNITION ON.
The doors will UNLOCK and LOCK.
Remove second key from ignition.
> B.E.M.
P.C.M.
DIAGNOSTIC MENU
PRESS ENTER KEY
FALCON B.E.M. PATS
PRESS ENTER KEY
SPECIAL FUNCTIONS
DIAGNOSTIC MENU
PRESS ENTER KEY
> CLEAR PATS 3 SYSTEM
PARAMETER RESET
DIAGNOSTIC MENU
PRESS ENTER KEY
B.E.M.
> P.C.M.
DIAGNOSTIC MENU
PRESS ENTER KEY
9