Filter
Top Products
SPECIAL FUNCTIONS
CLEARING/PROGRAMMING PATS 1 & 2 SYSTEM (DIESEL)
CLEAR PATS 2 SYSTEM
ALL KEYS CLEARED
KEYS PROGRAMMED : 1
PRESS ENTER KEY
PROGRAM KEYS
3 KEYS REQUIRED
PRESS ENTER KEY
NOTE : If CONDITIONS INCORRECT is
displayed then check the connection to
the diesel pump, and clean the connec-
tions.
NOTE : If the time continues after 15
minutes and does not clear, then check
to ensure the system selected is cor-
rect or check the connection to the die-
sel pump, and clean the connections.
NOTE : If WAITING TO CLEAR is not
displayed this indicates the incorrect
system has been selected.
If successful the TESTER will display
all keys cleared and how many keys
are programmed.
The key in the ignition is now pro-
grammed as the master key.
After Master key has been programmed
additional keys can be added in the
normal manual procedure as described
in the previous section
9