Filter
Top Products
307-01-23 307-01-23Automatic Transaxle/Transmission
ASSEMBLY (Continued)
104. Install the parking pawl assembly and gasket. 107. Using the special tools, install the output shaft
flange.
1 Install the parking pawl shaft.
2 Install the parking pawl return spring.
3 Install the parking pawl.
4 Install a new gasket.
108. Install a new nut.
• Tighten to 131 Nm (97 lb-ft).
105. Install the extension housing.
• Tighten to 25 Nm (18 lb-ft).
109. CAUTION: The digital transmission
range sensor must fit flush against the boss
on the case to prevent damage to the
sensor.
106. Using the special tool, install the extension
Install the digital transmission range (TR)
housing seal.
sensor and loosely install the screws.
2005 Mustang, 12/2004