Filter
Top Products
307-01-13 307-01-13Automatic Transaxle/Transmission
ASSEMBLY (Continued)
58. CAUTION: Install the center support
retaining ring with the tapered side facing
up.
CAUTION: Make sure the notch
opening is not obstructed by the center
support retaining ring.
Install the center support retaining ring.
1 Make sure the center support retaining ring
is installed with the tapered side facing up.
2 Make sure the opening of the center support
retaining ring is positioned correctly.
60. Install the overdrive ring gear, overdrive
one-way clutch and center shaft assembly.
61. CAUTION: Do not bend the trigger
wheel. Make sure that the No. 2 thrust
bearing is in this assembly.
Install the planetary gear overdrive carrier.
59. Install the center shaft thrust bearing (No. 3).
2005 Mustang, 12/2004