Filter
Top Products
307-01-11 307-01-11Automatic Transaxle/Transmission
ASSEMBLY (Continued)
48. Install the intermediate band anchor strut.
51. Loosely install the screw.
49. CAUTION: To avoid a ‘‘fall-out’’
condition of the strut from the screw during
assembly and function, the small ‘‘U’’ shape
notch should be toward the band/case side
and the large ‘‘U’’ shape notch toward the
main control side.
Position the strut in the transmission case.
1 Band/case side of the anchor (small U
notch).
2 Main control side of the anchor (large U
notch).
52. Install the intermediate band apply strut.
50. CAUTION: If the strut is installed
incorrectly, transmission damage will occur.
Check to make sure that the intermediate band
anchor strut is installed in the correct
orientation to the case and adjustment screw.
2005 Mustang, 12/2004