Filter
Top Products
307-01-18 307-01-18Automatic Transaxle/Transmission
ASSEMBLY (Continued)
82. CAUTION: The special tools must be
used to correctly align the pump with the
adapter plate to reduce gear noise, bushing
failure and leakage.
Using the special tool, align the fluid pump to
the adapter plate.
85. CAUTION: Do not allow overdrive
band adjustment screw to back out. Band
strut could fall out of position.
CAUTION: Install, but do not tighten,
a new locknut on the band adjustment screw.
Apply petroleum jelly to the locknut seal.
Install a new locknut on the band adjustment
83. Install screws. Tighten the screws in a star
screw.
pattern.
• Tighten to 25 Nm (18 lb-ft).
84. Remove the special tools and install the 2
remaining screws.
• Tighten to 25 Nm (18 lb-ft).
2005 Mustang, 12/2004