Filter
Top Products
307-01-22 307-01-22Automatic Transaxle/Transmission
ASSEMBLY (Continued)
99. CAUTION: Inspect the transmission
case bore to make sure it is free of debris
and not damaged. If damaged, transmission
leak may occur.
Install the solenoid body. Tighten the screws in
sequence shown.
• Tighten to 8 Nm (71 lb-in).
102. NOTE: The transmission fluid pan gasket is
reusable. Clean and inspect for damage. If not
damaged, the gasket should be reused.
Install the transmission fluid pan and gasket
and loosely install the screws.
100. Install the reverse servo. Tighten the bolts in
the sequence shown in 2 stages.
• Stage 1: Tighten to 5 Nm (44 lb-in).
• Stage 2: Tighten to 11 Nm (8 lb-ft).
103. Tighten the 16 screws in a crisscross
sequence.
• Tighten to 11 Nm (8 lb-ft).
101. CAUTION: Lubricate the fluid filter
seals with clean automatic transmission
fluid or they may be damaged.
NOTE: Make sure that the fluid filter seals
are correctly seated on the filter.
Lubricate the seals and install the transmission
fluid filter.
• Tighten to 10 Nm (89 lb-in).
2005 Mustang, 12/2004